Default Settings; Leds; A.4 Default Settings - Siemens siprotec 7SD5 User Manual

A.4

Default Settings

A.4.1

LEDs

Table A-1
1)
2)
3)
4)
7SD5 Manual
C53000-G1176-C169-1
LED Indication Presettings
LEDs Vorrangierte
Funktion
LED1 Relay PICKUP L1
LED2 Relay PICKUP L2
LED3 Relay PICKUP L3
LED4 Relay PICKUP E
LED5 DT inconsistent
DT unequal
Par. different
Equal IDs
LED6 Relay TRIP
Relay TRIP 3ph.
LED7 no presetting
Relay TRIP 1pL1
Relay TRIP 1pL2
Relay TRIP 1pL3
LED8 Test Diff.
TestDiff.remote
LED9 PI1 Data fault
LED10 PI2 Data fault
LED11 Diff block
LED12 AR not ready
LED13 Emer. mode
LED14 Alarm Sum Event
only devices with three-pole tripping
only devices with single-pole and three-pole tripping
only devices with 2 protection data interfaces
only devices with automatic reclosure function
Function No.
503 Relay PICKUP Phase L1
504 Relay PICKUP Phase L2
505 Relay PICKUP Phase L3
506 Relay PICKUP Earth
3233 Device table has inconsistent
numbers
3234 Device tables are unequal
3235 Differences between common pa-
rameters
3487 Equal IDs in constellation
511 Relay GENERAL TRIP command
515 Relay TRIP command Phases L123
1)
- -
512 Relay TRIP command - Only Phase
2)
L1
513 Relay TRIP command - Only Phase
2)
L2
514 Relay TRIP command - Only Phase
2)
L3
3190 Diff: Set Teststate of Diff. protection
3192 Diff: Remote relay in Teststate
3229 Prot Int 1: Reception of faulty data
3231 Prot Int 2: Reception of faulty data
3148 Diff: Differential protection is blocked
2784 AR: Auto-reclose is not ready
2054 Emergency mode
160 Alarm Summary Event

A.4 Default Settings

Description
1)
2)
3)
4)
609