Terminal Setup; Adjusting Volumes; To Adjust Handset Receiver Volume; To Adjust Speaker Volume - NEC UNIVERGE DT930 User Manual

TERMINAL SETUP

■ While you set up terminal, the "soft
key" means local soft key.
■ If the Back / Exit button is pressed
while the terminal setting menu is
displayed, Favorite screen is displayed
regardless of the home screen
settings.

ADJUSTING VOLUMES

Display Example while adjusting volumes level.
Volume Type
TO ADJUST HANDSET RECEIVER
VOLUME
It is possible to adjust the volume level of the
handset receiver during a call in progress using
handset.
Press Up /Down key in the offhook status or during
a call when using the handset.

TO ADJUST SPEAKER VOLUME

It is possible to adjust the volume level of the
speaker during a call in progress using speaker.
Press Up /Down key during speakerphone
operation or during a call using the speaker.

TO ADJUST RINGER TONE

It is possible to adjust the volume level of the ringer
tone during incoming call arrival.
Press Up /Down key during ringing.
Volume Level

TO SET RINGER TONE

This section explains how to set a ringer tone
WHEN DISTINCTIVE RINGING
PATTERNS TO DISTINGUISH INTERNAL
AND EXTERNAL INCOMING CALLS ARE
PROVIDED
Leave the setting of "Ring Tone" to " Automatic"
(default setting).
Use each default ringer tone for both
external and internal incoming calls.
Ringing pattern is programmable on
a system basis. For details, please
contact the system administrator.
WHEN DISTINCTIVE RINGING
PATTERNS TO DISTINGUISH INTERNAL
AND EXTERNAL INCOMING CALLS IS
NOT PROVIDED
You can set ringer tone from "Settings". The
following explains how to set.
1.
Display the Menu screen, and select "Settings"
2.
Select " 1 User Settings".
3.
Select " 1 Incoming Call"
4.
Select " 3 Ring Tone".
5.
Select " 2 Internal Call".
Do not select " 1 External Call".
Ringing Tone which has been selected
in " 2 Internal Call" will be applied to
both external and internal incoming
calls.
18
TERMINAL SETUP