Connecting And Setting Up The Itx-3370; Using The Phone Stand; Using The Slots For Wall Mounting - NEC GT890 User Manual

Connecting and Setting Up the ITX-3370

The ITX-3370 can be installed using the built-in stand or attached on the wall using the slots for wall
mounting.

Using the Phone Stand

The ITX-3370 has a built-in phone stand. To set up the ITX-3370 as your desk phone, follow the steps
below:
1. Take the phone stand out on the back and adjust the angle to place the phone steady on the desk;
2. Connect the handset and main phone case with the phone cord;
3. Connect the LAN port of the phone to the RJ-45 socket of a PoE Switch or a router (LAN side (PoE) of
the router) using the Ethernet cable.
The LCD will display the booting up screen or firmware upgrading information. Before continuing,
please wait for the main screen display to show up.
4. Using the web configuration interface or from the menu of the touch screen, you can further configure
network connection using static IP, DHCP etc.

Using the Slots for Wall Mounting

1. Attach the wall mount to the slots on the back of the phone;
Figure 5: Built in Stand and Mounting Slots on ITX-3370
Figure 6: ITX-3370 Back / Side View
18