Handset Operation; Switching Between The Wired Phone And Cordless Phone (Dtz-8R-1 Handset) - NEC Dterm DTZ-8R-1 Owner's Manual

S 2 H
ECTION ANDSET
This operation is one of the examples for the DTZ-8R-1 with an NEC PBX. As a
result, it might be different from actual operation on your system. Operation of
DTZ-8R-1 in digital mode depends on each PBX specification.
IMPORTANT
2.1
Owner's Manual
F 1 = F N C
F 1 = A N S
F 1 = L K 0 1
O
PERATION
The screens in this section are system-dependent and may not match your
❍
handset.
Depending on the system the handset may not follow automatic idle return.
❍
Switching Between the Wired Phone and Cordless Phone
(DTZ-8R-1 Handset)
Press the Base Left key to change to the cordless phone (DTZ-8R-1 Handset).
When the cordless phone is selected, there is no message on the LCD. Press the
Base Right key to change to the wired phone. When the wired phone is selected,
the LCD shows 'DESK TEL'.
Base Left Key
[▼] press up key
[▼] press up key
Base Right Key
Issue 1.0
6-5