Advanced; Rip Settings - D-Link Router User Manual

Section 3 - Configuration
From this page advanced users can configure the router to use the Routing Internet Protocol (RIP). RIP is an Internet protocol you can set up to
share routing table information with other routing devices on your LAN, at your ISP's location, or on remote networks connected to your network
via WAN.
Interface: Select the interface to apply the RIP rule to.
Receive Select the version of RIP protocol to use when receiving RIP
Mode:
updates.
Send Mode: The options are RIP1, RIP2, or Both.
Click Add to add your current settings to the table. Click the
Action:
trash can icon ( ) to delete rules already stored in the table.
D-Link DWR-961 User Manual

Advanced

RIP Settings

56