Debug Platform Qos-Acl-Tcam - Cisco Catalyst 3750 Command Reference Manual

Hide thumbs Also See for Catalyst 3750:
Table of Contents

Advertisement

Appendix B
Catalyst 3750 Switch Debug Commands

debug platform qos-acl-tcam

Use the debug platform qos-acl-tcam privileged EXEC command to enable debugging of the quality
of service (QoS) and access control list (ACL) ternary content addressable memory (TCAM) manager
software. Use the no form of this command to disable debugging.
Syntax Description
all
ctcam
errors
labels
mask
rpc
tcam
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.1(11)AX
Usage Guidelines
The undebug platform qos-acl-tcam command is the same as the no debug platform qos-acl-tcam
command.
When you enable debugging, it is enabled only on the stack master. To enable debugging on a stack
member, you can start a session from the stack master by using the session switch-number privileged
EXEC command. Then enter the debug command at the command-line prompt of the stack member. You
also can use the remote command stack-member-number LINE privileged EXEC command on the stack
master switch to enable debugging on a member switch without first starting a session.
Related Commands
Command
show debugging
78-16181-03
debug platform qos-acl-tcam {all | ctcam | errors | labels | mask | rpc | tcam}
no debug platform qos-acl-tcam {all | ctcam | errors | labels | mask | rpc | tcam}
Display all QoS and ACL TCAM (QATM) manager debug messages.
Display Cisco TCAM (CTCAM) related-events debug messages.
Display QATM error-related-events debug messages.
Display QATM label-related-events debug messages.
Display QATM mask-related-events debug messages.
Display QATM remote procedure call (RPC) related-events debug messages.
Display QATM TCAM-related events debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, see the Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
debug platform qos-acl-tcam
Catalyst 3750 Switch Command Reference
B-59

Advertisement

Table of Contents
loading

Table of Contents