Debug Platform Qos-Acl-Tcam - Cisco 3020 - Catalyst Blade Switch Command Reference Manual

Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands

debug platform qos-acl-tcam

Use the debug platform qos-acl-tcam privileged EXEC command to enable debugging of the quality
of service (QoS) and access control list (ACL) ternary content addressable memory (TCAM) manager
software. Use the no form of this command to disable debugging.
Syntax Description all
ctcam
errors
labels
mask
rpc
tcam
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)SEF
Usage Guidelines The undebug platform qos-acl-tcam command is the same as the no debug platform qos-acl-tcam
command.
Related Commands Command
show debugging
OL-8916-01
debug platform qos-acl-tcam {all | ctcam | errors | labels | mask | rpc | tcam}
no debug platform qos-acl-tcam {all | ctcam | errors | labels | mask | rpc | tcam}
Display all QoS and ACL TCAM (QATM) manager debug messages.
Display Cisco TCAM (CTCAM) related-events debug messages.
Display QATM error-related-events debug messages.
Display QATM label-related-events debug messages.
Display QATM mask-related-events debug messages.
Display QATM remote procedure call (RPC) related-events debug messages.
Display QATM TCAM-related events debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, see the Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
debug platform qos-acl-tcam
B-45