Modification Of The Installer-Level Parameters - REMEHA Quinta Pro 30 Installation And Service Manual

5. Start-up
3x
2x
66
1. Press the two keys f simultaneously and then key [+] until the
2. Select the users menu using the key S. p[1 is displayed with
3. Press the S key a second time. .
4. Change the value by pressing the [-] or [+] key. In this example
5. Confirm the value with the S key. p[1 is displayed with 1
6. Press 2 times on key > to return to the current operating mode.
5.7.3.
Parameters p17 to df must only be modified by a qualified
professional. To prevent unwanted settings, some parameter settings
can only be changed after the special access code 0012 is
entered.
1. Press the two keys f simultaneously and then key [+] until the
2. Select the fitter menu using the ® key. c0de appears on the
3. Use keys [-] or [+] to input the installer code 0012.
4. Confirm using key S. p[1 is displayed with 1 flashing.
5. Press the S key a second time. .
6. Change the value by pressing the [-] or [+] key. In this example
7. Confirm the value with the S key: p[1 is displayed with 1
8. If necessary, set other parameters by selecting them using the
9. Press 2 times on key > to return to the current operating mode.
T000819-E
symbol W flashes on the menu bar.
1 flashing.
using key [-] to 60°C.
flashing.
The parameters p1 to p8 are changed in the same way
as p1. After step 2, use the [+] key to move to the
required parameter.
Modification of the installer-level
parameters
CAUTION
Modification of the factory settings may be detrimental to
the functioning of the boiler.
symbol ? flashes on the menu bar.
display.
using key [-] to 60°C.
flashing.
[-] or [+] keys.
The boiler also returns to operating status if no keys are
pressed for 3 minutes.
Quinta Pro 45 - 65 - 90 - 115
080310 - 123157-AA