Setting The Manual Mode - REMEHA Quinta Pro 30 Installation And Service Manual

5. Start-up
2x
bar
2x
T000824-E
70
5.7.7.

Setting the manual mode

In some cases it may be necessary to switch the boiler to manual
operation, For example, if the controller has not yet been
connected. The boiler can be switched to automatic or manual
operation under the symbol E. To do this, proceed as follows:
1. Press the two keys f simultaneously and then key [+] until the
symbol E flashes on the menu bar.
2. Press the S key:
or
The text Zv with the current water pressure (only if an outside
sensor is connected). The flow temperature is determined by the
internal heating curve.
or
The value of the minimum flow temperature.
3. Press the [-] or [+] key to increase this value temporarily in manual
operation.
4. Confirm the value with the S key. The boiler is now set to manual
operation.
5. Press 2 times on key > to return to the current operating mode.
Quinta Pro 45 - 65 - 90 - 115
080310 - 123157-AA