Recommendations - REMEHA Quinta Pro 30 Installation And Service Manual

Quinta Pro 45 - 65 - 90 - 115
080310 - 123157-AA
CAUTION
The following components of the appliance are at a
voltage of 230 V:
Electrical connection of the heating pump (Central
4
heating).
Electrical connection of the combined gas valve unit.
4
Electrical connection of the fan.
4
The majority of components in the control panel.
4
Ignition transformer.
4
Connection of the power supply cable.
4
CAUTION
When the power supply cable has to be replaced, it
4
must be ordered from Remeha.
It is possible to connect various control, safety and regulation systems
to the boiler. The standard control PCB (PCU) can be extended with
the following, among others:
4 The 0-10V control PCB (accessory IF-01). For installation behind
the left hand cover on the control panel.
4 The extended control PCB (accessory SCU-S02). For installation
in a box (accessory).
4 The control PCB (accessory SCU-S03). For installation in a box
(accessory).
¼ For the optional PCBs, see chapter: "Optional electrical
connections", page 39
4.8.2.

Recommendations

WARNING
Only qualified professionnals may carry out electrical
4
connections, always with the power off.
The boiler is entirely pre-wired. Do not modify the
4
connections inside the control panel.
Earth the appliance before making any electrical
4
connections.
Make the electrical connections of the appliance according to:
4 the instructions of the prevailing standards.
4 the instructions on the circuit diagrams provided with the
appliance.
4 the recommendations in the instructions.
CAUTION
Separate the sensor cables from the 230 V cables.
4. Installation
29