REMEHA Quinta Pro 30 Installation And Service Manual page 33

Quinta Pro 45 - 65 - 90 - 115
2
1
X13
080310 - 123157-AA
4. Open the tooling box by opening the clip fastener on the front side.
5. Run the right-hand connection cable(s) across the control unit box
in the appropriate cable duct (the furthest to the right).
6. Unscrew the necessary cable clamps (to access the connector
block) and introduce the cables.
T001577-A
7. Connect the cable to the appropriate terminals on the connector
block.
8. Firmly retighten the cable clamps and close the control box.
X12
T001578-B
4. Installation
31