Modification Of The User-Level Parameters; Modification Of The Installer-Level Parameters - REMEHA Quinta Pro 30 Installation And Service Manual

5. Commissioning
Parameter Description
Mains detection phase
p43
Maintenance message
p44
Service operating hours
p45
Service burning hours
p46
Detection of connected SCUs
Zd
df and dV Factory setting
(1) Do not modify these factory settings unless absolutely necessary. E.g. to adapt the boiler to: G31 (Propane)
1x
2x
58
Adjustment range
0 = Stop
1 = Start
Do not modify
Do not modify
Do not modify
0 = No detection
1 = Detection
To restore the factory settings or when replacing the
main PCB, enter the values dF and dU from the type
plate in parameters df and dV
T001906-B
5.7.2.

Modification of the user-level parameters

Parameters p1 to p8 can be modified by the user in order to meet
central heating and DHW comfort needs.
CAUTION
Modification of the factory settings may be detrimental to
the functioning of the appliance.
1. Press the two keys f simultaneously and then key [+] until the
symbol W flashes on the menu bar.
2. Select the users menu using the key S . p[1 is displayed with
1 flashing.
3. Press the S key a second time. The value 80 °C appears and
flashes (for example).
4. Change the value by pressing the [-] or [+] key. In this example
using key [-] to 60 °C.
5. Confirm the value with the S key. p[1 is displayed with 1
flashing.
6. Press the > key 2 times to return to the current operating
mode.
The parameters p1 to p8 are changed in the same way
as p1. After step 2, use the [+] key to move to the
required parameter.
5.7.3. Modification of the installer-level
parameters
Parameters p17 to df must only be modified by a qualified
professional. To prevent unwanted settings, some parameter settings
can only be changed after the special access code 0012 is
entered.
Quinta Pro 30 - 45 - 65 - 90 - 115
Factory setting
Quinta Pro
30 45 65 90 115
0
1
175
30
0
X
Y
09/06/2011 - 123157-AF