Changing The Parameters At Installer Level; Setting The Maximum Load For Ch Operation - REMEHA Quinta Pro series Installation, User And Service Manual

Fig.44 Inputting the access code
3x
2x
Fig.45 Load Quinta Pro 30
40
M
30
F
Q
20
0
1500 2500 3500 4500
4100
R
Fig.46 Load Quinta Pro 45
60
41
Q
20
0
1500 2500 3500 4500
R
Fig.47 Load Quinta Pro 65
80
62
Q
40
20
0
1500 2500 3500 4500
R
123157 - v.06 - 24022015
AD-0000076-01
5500 6500 7500
AD-3000035-01
M
F
5500 6500 7500
5600
AD-3000034-01
M
F
5500 6500 7500
5800
AD-3000033-01

9.2.2 Changing the parameters at installer level

Parameters to
To prevent unwanted modifications to settings, some parameters can only
be changed after the special access code
1. Press the two keys at the same time and then press the
until the symbol flashes in the menu bar.
2. Select the installer menu using the
appears on the display.
3. Use the or keys to set the installer code
4. To confirm, press the
: appears with a flashing
5. Press the key again.
The value °C (for example) appears and flashes.
6. Change the value by pressing the
press the key to set the value to
7. Press the key to confirm the value.
: appears with a flashing
8. Set any other parameters by selecting them using the
9. Press the key twice to leave this menu and return to the opera­
tion display.
Note
The boiler also returns to operating status if no keys are pressed
for 3 minutes.

9.2.3 Setting the maximum load for CH operation

M Maximum heat input
F Factory setting
Q Load (Hi) (kW)
R Fan speed (rpm)
M Maximum heat input
F Factory setting
Q Load (Hi) (kW)
R Fan speed (rpm)
M Maximum heat input
F Factory setting
Q Load (Hi) (kW)
R Fan speed (rpm)
may only be modified by a recognised installer.
is entered.
key.
key.
.
or keys. In this example,
°C.
.
9 Settings
key
.
or keys.
49