System Settings - Canon i-SENSYS MF6140dn User Manual

0FR4-0KC

System Settings

NOTE
About the menu options in the following chart
Default settings are highlighted in bold.
The settings marked with "
The settings marked with "
For values with "
Network Settings
"Network Settings"
System Manager Information Settings
Register the system manager information for the machine.
System Manager ID and PIN
System Manager ID: Up to seven digits
System Manager PIN: Up to seven digits
System Manager Name: Up to 32 characters
"Setting the System Manager Information"
Device Information Settings
Register the machine name and installation site.
Device Name: Up to 32 characters
Location: Up to 32 characters
"Registering the Name of the Machine and Location "
Dept. ID Management On/Off
Settings
Dept. ID Mngt.
On/Off
Security Settings
Settings
Use SSL
IPv4 Address Filter
Downloaded from ManualsPrinter.com Manuals
*A
" cannot be imported or exported via the Remote UI.
*1
" are only for MF6180dw.
*2
" mark, the default value varies depending on the country where you are using the machine.
Descriptions
Specify whether to use Dept. ID Management.
Off, On
"Activating the Department ID Management"
Set whether to use SSL encryption whenever the machine exchanges data with a Remote UI.
Off, On
"Specifying SSL"
It rejects or allows transmissions with specific IP addresses on the IPv4 network.
Send Filter: Off, On
Receive Filter: Off, On
"Restricting Sending/Receiving to/from Specific IP Addresses"
Descriptions