Canon i-SENSYS MF6140dn User Manual page 929

8
Close the feeder gently.
9
Press [ ] (Start).
Scanning of the test chart starts.
NOTE
Check the temperature of the installation site
If the room temperature is too low, correction may not be performed properly.
If <Adjustment failed.> appears
Is the paper loaded correctly?
Load plain paper or recycled paper of A4/Letter size in the paper drawer.
Is the test chart placed on the platen glass correctly?
Place the test chart on the platen glass with the printing side face down and Set the black stripe on the left
side.
Downloaded from ManualsPrinter.com Manuals