Installing The Mf Drivers And Mf Toolbox - Canon i-SENSYS MF6140dn User Manual

0H50-004

Installing the MF Drivers and MF Toolbox

Install the software to use the machine.
"Installing Using [Easy Installation] (For Windows)"
"Installing Using [Custom Installation] (For Windows)"
"Installing the Software (For Macintosh)"
"USB Cable Connection (Only when Connecting with USB)"
"Checking the Installation Results (For Windows)"
"Registering the Printer and Fax (For Macintosh)"
"Installing the Drivers Downloaded from the Canon Homepage"
The method of installation varies depending on the connection method or environment.
* If the User Manual CD-ROM is supplied with the machine, install the e-Manual from the User Manual CD-ROM.
OS
Windows
Macintosh
When installing downloaded drivers
Connect the USB cable after installing the MF drivers. If you connected the USB cable before installing the MF drivers,
refer to "The USB cable was connected before installing the MF
Presto! PageManager is not installed by selecting [Easy Installation]. To install the software, select [Custom Installation].
If you are operating in the IPv6 environment, you cannot install the drivers or software following procedures below.
Refer to "Installing the MF Drivers on the WSD Network (For
You may not be able to use the scan function in the IPv6 environment.
IMPORTANT
User rights for logging on to Windows
Log on as a user with administrative rights.
When installing via USB connection
Connect the USB cable after the software installation.
Make sure that the power of the machine is turned ON when connecting the USB cable.
When installing via network connection
Before starting the installation, check the following.
The computer and machine are connected via the network.
The power of the machine is turned ON.
The IP addresses are properly set up.
Downloaded from ManualsPrinter.com Manuals
Connection method
USB connection
Network connection
(IPv4 environment)
Network connection
*
(IPv6 environment)
USB connection
Network connection
Installing the MF Drivers and MF Toolbox
Installation method
"Installing Using [Easy Installation] (For Windows)"
"Installing Using [Custom Installation] (For Windows)"
"Installing the MF Drivers on the WSD Network (For Windows)"
"Installing the Software (For Macintosh)"
"Installing the Drivers Downloaded from the Canon Homepage"
drivers."
Windows)" to install MF Drivers.
*