Copying By Saving Paper - Canon i-SENSYS MF6140dn User Manual

0FR4-053

Copying by Saving Paper

See "Attention (Combination of Copy
Press [ ] (Paper Save Copy) to save paper when making a copy.
Choose one of the following four combinations of 2 on 1/4 on 1 and 2-Sided copy settings, as shown in the table below.
2 on 1 1->2-Sided
4 on 1 1->2-Sided
2 on 1 1->1-Sided
4 on 1 1->1-Sided
IMPORTANT
Precautions on 2-Sided Copying
Do not touch your document when making 2-sided copying until the process is complete. After copying on the front
side is complete, the document is partially output, reserved, and fed into the machine again for copying on the back
side.
Be sure to close the sub-output tray before making 2-sided copying.
1
Set the paper switch lever correctly to fit the size of paper used for 2-sided copying.
If the lever is not set correctly, sheets may not be fed properly, or paper jams may occur.
1. Open the lower rear cover.
2. Securely place the blue color paper size switch lever (A).
A4:
Letter, Legal:
Downloaded from ManualsPrinter.com Manuals
Settings)" before you start copying.
N on 1
Select Layout Format Settings
1->2-Sided
1->2-Sided
Pull
Push
2-Sided
Original Orientation Original Format
Portrait
Portrait
OFF
OFF
Book Type
Book Type