Canon i-SENSYS MF6140dn User Manual page 848

To change the type of destination that is registered to Group Dial, first delete the registered destination
Action from Group Dial. Next, change the destination type, and then register the destination to Group Dial again.
"Registering and Editing Destinations for Group Dialing"
<Cannot print RX data.>
Printing the receive fax data is not available due to the following reasons:
Toner cartridge needs to be replaced soon.
Toner cover is open.
Toner cartridge is not installed.
Problem
No paper
Paper is jammed.
Printing is not available due to any kind of error.
Other printing job is running.
Action If an error message is shown, follow the onscreen instructions.
<Cannot find access point.>
When setting up using the WPS function, the machine could not detect wireless LAN router or access
Problem 1
points.
Repeat the setup again using the WPS function.
Push Button Mode: Press the WPS button within two minutes from the start of the search for an
access point.
"Setting the Machine Using WPS (Push Button
PIN code mode: Enter the PIN code from a computer to the wireless LAN router or access point
within 10 minutes of the start of the search for an access point.
Action
"Setting the Machine Using WPS (PIN Code
"Entering the PIN Code in the Wireless LAN Router/Access
For details on how to push the WPS button or to enter PIN code, refer to the instruction manual for
your wireless LAN routers and/or access points or contact their manufactures.
Problem 2 The connection method was not selected correctly.
Select the correct method and connect again.
Action "Checking the SSID or Network Key of the Wireless LAN Router/Access Point"
"Setting by Manually Entering SSID"
The SSID of the wireless LAN router or access point was not entered correctly using the manual input
Problem 3
settings.
Enter the SSID and network key again correctly.
* The SSID and network key may be located on your wireless LAN router. For details, refer to the
Action
instruction manual for your wireless LAN routers, or contact their manufacturers.
Problem 4 Network problems are preventing the machine from detecting the wireless LAN router or access point.
Check network connection.
"Checking Network Connection (Wireless LAN)"
Action
If the access point cannot be determined even after checking the network connection, check the security
settings on the wireless LAN router or access point.
"When security settings on the wireless LAN router/access point are changed"
<Cannot send because more than one destination is set.>
Downloaded from ManualsPrinter.com Manuals
Mode)"
Mode)"
Point"