by selecting a coded dial code
by selecting a group address
from the Address book
in an LDAP server
under sequential broadcasting
When the destination confirmation screen is displayed:
After confirming details of the destination, press [OK] to proceed to the next step.
If <One-Touch/Coded Dial TX Confirmation> is set to <On> and the destination is specified by One-Touch keys or
Coded dialing codes, the screen is displayed.
5
Press [
] (Start).
When your fax is placed in the feeder
The scan starts. Your fax is sent to the destination when the scan is complete.
When your fax is placed on the platen glass
Perform the following procedure.
(1) Select the size of the original document using [
(2)
Place the next page on the platen glass and press [
Press [
] (Start) for each page.
(3) When all documents are scanned completely, select <Start Sending> using [
Your fax is sent to your fax destination.
Downloaded from ManualsPrinter.com Manuals
] or [
] and press [OK].
] (Start).
] or [
] and press [OK].