Performing a Scan Using a Shortcut Key
1
Place your document.
"Loading Paper"
"Supported Document Types"
NOTE
When scanning from the operation panel
You cannot scan more than one document at a time.
2
Press [
].
3
Press [
] (Scan > PC1, Scan > PC2) into which the destination that you want to select is registered.
Scanning starts. When scanning is complete, the screen returns to the scan mode screen after the scanned document is
saved.
When scanning cannot be performed
You cannot perform a scan while the MF Toolbox setup screen is displayed.
Click [
] to close the screen before starting a scan.
Downloaded from ManualsPrinter.com Manuals