Onscreen Messages - Canon i-SENSYS MF6140dn User Manual

0FR4-0L1

Onscreen Messages

What follows is a list of onscreen message descriptions and corresponding remedies.
<<XXXX>* is restricted. Log in?>
<Adjustment failed.>
<Can not perform. The address has been edited or deleted.>
<Cannot change destination type if registered to a group.>
<Cannot print RX data.>
<Cannot find access point.>
<Cannot send because more than one destination is set.>
<Cannot specify a group.>
<Cannot use Cloud print (Server auth. failed.)>
<Cannot use Cloud print (Server comm. error.)>
<Cannot use Cloud print Check from Remote UI.>
<Cannot use USB hub. Check hub.>
<Cannot write.>
<Cleaning failed.>
<Close front cover.>
<Computer is restricted.>
<Connect computer.>
<Connect the memory media.>
<Could not connect. Check PSK settings.>
<Could not connect. Check security settings.>
<Could not connect. More than one access point was detected.>
<Dept. ID is not set. Register from Remote UI.>
<Incorrect number of characters/invalid characters entered.>
<Incorrect Size/Setting>
<Insert toner cartridge.>
<Memory is full.>
<Memory is full. Enter original type settings again.>
<Memory is full. Scanning canceled. Print?>
<Memory full. Process secure print jobs.>
<Memory Media is restricted.>
<New destinations are restricted. >
<No Paper>
<No registered destinations.>
<No response from host.>
<No response.>
<Number is incorrect. Enter again.>
<Numbers do not match. Enter the numbers again.>
<Open authentication failed. Check WEP settings.>
<Paper jam.>
<Prepare toner cartridge.>
<Printer Memory Full: Status Monitor/Cancel>
<Remote scanning is restricted.>
<Remove paper from output tray.>
<Select paper larger than A4/LTR.>
<Sending from History is restricted.>
Downloaded from ManualsPrinter.com Manuals