Sending Problems - Canon i-SENSYS MF6140dn User Manual

0FR4-0L5

Sending Problems

Check the following first.
Make sure that the telephone line settings are properly configured.
"Select Line Type"
Then, see the following sections.
Cannot send a fax
Unable to redial a number from the history
Fax number confirmation is required when specifying a destination.
Unable to send a fax over the optical line.
Memory is insufficient to send a fax.
Transmission speed is too slow.
Errors occur frequently during sending.
Sent faxes print poorly at the receiving fax machine (spotting, size reductions, or contrast problems).
Cannot send a fax
See the following section:
"Cannot Send a Fax"
Unable to redial a number from the history
Check the setting set for <Restrict History TX>.
"Restricting Sending from Job History"
Fax number confirmation is required when specifying a destination.
Check the setting set for <Fax No. Confirmation Re-Entry>.
"Confirming the Entered Fax Number "
Unable to send a fax over the optical line.
Use of the optical line is not guaranteed.
Memory is insufficient to send a fax.
High-volume documents or sending documents in high image quality may exceed the maximum memory capacity. Set
the appropriate image quality and send the document again.
To maintain the quality of a high-volume document, split the document into smaller subsets and send one subset at
a time.
If the document contains fine text or photographs, send it directly instead of using a memory transmission.
If the document does not contain fine text or photographs, set the resolution to <200 x 100 dpi (Normal)>.
"Changing the Scan Settings (Fax)"
Print, send, or delete jobs stored in memory.
Transmission speed is too slow.
Downloaded from ManualsPrinter.com Manuals