Adjustment/Maintenance - Canon i-SENSYS MF6140dn User Manual

0FR4-0KA

Adjustment/Maintenance

NOTE
About the menu options in the following chart
Default settings are highlighted in bold.
Copy Image Adjustment
You can adjust copy images.
"Correcting Copy Images"
Printer Density
You can adjust the density when making copies, printing incoming faxes, printing from memory devices or printing reports.
-4 to 0 to +4
"Adjusting the Density"
Toner Saver Mode
Specify whether to conserve the amount of toner used for copying and faxing.
Off, On
"Using the Toner Saver Mode"
Black Text Processing for Color
Adjusts the value for determining whether to output black text on color documents as B&W or color.
Feeder: -3 to 0 to +3
Platen Glass: -3 to 0 to +3
"Adjusting Black Text in Color Documents (Black Text Processing Adjustment in Color Documents)"
Special Processing
Settings
Special Mode U
Special Mode V
Special Mode X (only
for media printing and
printing from PS/PCL
printer driver)
Downloaded from ManualsPrinter.com Manuals
Due to the paper type (e.g. heavy paper) or usage conditions (e.g. dry conditions), toner
smudges and spatters appear on the output. When this occurs, set the setting to ON.
Off, On
"Special Mode"
Paper (the printed side) curls when damp paper is used to print. When this occurs, change the
setting.
Off, Mode 1, Mode 2
"Special Mode"
Toner smudges and spatters appear on the output, due to the paper type or usage conditions.
When this occurs, change the setting.
Off, Mode 1, Mode 2, Mode 3
"Special Mode"
Descriptions