Canon i-SENSYS MF6140dn User Manual page 800

Auto RX Switch
RX Print Settings
Settings
2-Sided Printing
Reduce RX Size
RX Page Footer
Continue Printing
When Toner Is Low
*A
Fax Setup Guide
Specify initial fax settings and connect the telephone cable.
See the Getting Started.
Downloaded from ManualsPrinter.com Manuals
*1
On :
Remote RX ID: 00 to 25 to 99
"Remote RX"
Set the incoming call ring time before the machine switches to the fax mode automatically. This
option can be enabled when the <RX Mode> is set to <Manual>.
Off
On:
Incoming Ring Time: 1 to 15 to 99 (seconds)
"Auto RX Switch"
Enable this option to print on both sides of paper. This saves excessive paper consumption.
Off, On
"2-Sided Printing"
You can reduce the size of received documents and print them.
Off
On:
Ratio: Auto, 97, 95, 90, 75 (%)
Direction: Vertical/Horizontal, Vertical Only
"Reduce RX Size"
You can specify whether to print information such as reception date when printing received
documents.
Off, On
"RX Page Footer"
Specify whether to continue printing received documents when the toner is nearly empty.
Off, On
"Continue Printing When Toner Is Low"
Descriptions