Canon i-SENSYS MF6140dn User Manual page 809

Special Mode Z (only
for copying)
Special Mode B
Special Mode C (only
for printing received
fax and report printing)
Special Mode D
Clean Fixing Unit
If black streaks appear on printed paper, clean the fixing unit when replacing toner cartridges.
"Cleaning the Fixing Unit"
Clean Feeder
If your documents have black streaks or appear dirty due to pencil lead on the roller, clean the feeder.
"Cleaning the Feeder Automatically "
Downloaded from ManualsPrinter.com Manuals
Toner smudges and spatters appear on the output, due to the paper type or usage conditions.
When this occurs, change the setting.
Off, Mode 1, Mode 2, Mode 3
"Special Mode"
Toner smudges and spatters appear on the output, when the toner cartridge was replaced
recently, or the machine has not printed anything for an extended period of time. When this
occurs, change the setting.
Off, Mode 1, Mode 2, Mode 3
"Special Mode"
Toner smudges and spatters appear on the output, due to the paper type or usage conditions.
When this occurs, set the setting to ON. In addition, the machine runs more quietly in the
middle of a print run when this setting is set to ON.
Off, On
"Special Mode"
Toner smudges and spatters appear on the output, due to the paper type or usage conditions.
When this occurs, set the setting to ON. In addition, the machine runs more quietly in the
middle of a print run when this setting is set to ON.
Off, On
"Special Mode"