Canon i-SENSYS MF6140dn User Manual page 735

(1) Select the [Use SNMPv3] check box.
(2) Select the [Enable User] check box.
(3) Specify the SNMPv3 protocol.
[Use SNMPv3]
[User Name]
[MIB Access
Permission]
[Security Settings]
[Authentication
Algorithm]
[Encryption
Algorithm]
Downloaded from ManualsPrinter.com Manuals
When the check box is selected, you can use SNMPv3 protocol.
Enter a user name.
Specify MIB access authority. When both reading and writing is permitted, a user can access
this product from a computer on the network and change settings.
[Read/Write]
[Read Only]
Specify securities.
[Authentication
On/Encryption On]
[Authentication
On/Encryption Off]
[Authentication
Off/Encryption Off]
Select an algorithm to be used for authentication.
[MD5]
[SHA1]
To set or change the password, select the [Set/Change Password] check box and enter 6 to 16
alphanumeric characters in [Authentication Password] and [Confirm].
Select an algorithm to be used for encryption.
[DES]
[AES]
Both reading and writing are permitted.
Reading only is permitted.
Both authentication and encryption are adopted.
Only authentication is adopted.
Neither authentication nor encryption is adopted.
Use MD5.
Use SHA1.
DES is used.
AES DES is used.