Canon i-SENSYS MF6140dn User Manual page 847

<Set encryption to Auto.>
<Shared Key auth. failed. Check WEP settings.>
<Turn the main power ON. If problem persists contact dealer or service rep.>
<Unsupported USB device is connected. Check USB device.>
<WEP key is not set correctly. Check WEP settings.>
<Wireless connection failed.>
<WPS connection failed.>
<You can only forward to destinations registered in the address book.>
<<XXXX>* is restricted. Log in?>
* The following are displayed for <XXXX>.
Copying
Printing
Faxing
Scanning
Problem Usable functions are limited due to management of Department ID.
Action Department ID Management settings must be changed. Contact your administrator for more information.
<Adjustment failed.>
Problem 1 Appropriate paper that is required for correction is not loaded in a paper drawer.
Load plain or recycled A4 or Letter size paper in the paper drawer.
Action "Loading Paper"
"Setting the Paper Size and Type"
Problem 2 An adjustment image that is required for correction is not placed on the platen glass correctly.
Place the adjustment image on the platen glass with the print side face down and the black stripe toward
Action the left side of the machine.
"Correcting Copy Images"
Problem 3 Paper jammed during correction.
Remove the jammed paper, and perform correction again.
Action "Clearing Jams"
"Loading Paper"
Problem 4 The amount of toner required for correction is insufficient.
Replace with a new toner cartridge.
Action
"Replacing Toner Cartridges"
<Can not perform. The address has been edited or deleted.>
Problem Tried to edit or delete a destination from the machine, but it was already edited or deleted from Remote UI.
Action Confirm destination again.
<Cannot change destination type if registered to a group.>
Problem A selected destination could not be edited because it was registered to Group Dial.
Downloaded from ManualsPrinter.com Manuals