Canon i-SENSYS MF6140dn User Manual page 262

Specifying destinations using coded dial codes
Press [ ] (Coded Dial), and then enter the three-digit registration number (001 to 181) with the numeric keys.
To select a destination from the coded dial codes, you need to register destinations in these codes in advance.
"Registering and Editing Coded Dial Codes"
When the wrong key is pressed
(1) Press [
] (Clear).
(2) Select <Yes> using [
To clear all the scan settings specified, press [
Specifying destinations using group addresses
When group addresses are registered in one-touch keys
Press the one-touch key (01 to 19) in which the group address that you want to select is registered.
When group addresses are registered in coded dial codes
Press [ ] (Coded Dial), and then enter the three-digit registration number (001 to 181) with the numeric keys.
To select a destination from the coded dial codes, you need to register group addresses in these codes in advance.
"Registering and Editing Destinations for Group Dialing"
When the wrong key is pressed
(1) Press [
] (Clear).
(2) Select <Yes> using [
To clear all the scan settings specified, press [
Specifying destinations using the address book
After searching for destinations from the registered address book (one-touch keys, coded dialing, or group dialing), the
destinations to be specified appear on the display. You can specify the displayed address as a destination. You can also
Downloaded from ManualsPrinter.com Manuals
] and press [OK].
] and press [OK].
] (Reset).
] (Reset).