Attention (Cleaning The Machine) - Canon i-SENSYS MF6140dn User Manual

0FR4-0RL

Attention (Cleaning the Machine)

See "Maintenance and
Before cleaning the machine, note the following.
Make sure that no jobs are stored in memory before turning OFF the power switch and disconnecting the power cord.
Use a soft cloth to avoid scratching the components.
Do not clean the machine components with tissue paper, paper towels, or similar materials. These materials tend to
stick to the components or generate static charges.
Precautions to take when cleaning the feeder
Do not dampen the cloth too much, as this may tear the document or damage the machine.
Precautions to take when closing the feeder
Be careful not to get your fingers caught.
Precautions to take when you get toner onto your hands or into clothing
If toner comes in contact with your hands or clothing, wash them immediately in cold water. Do not use warm water, as it
will set the toner and make it difficult to remove the toner stains.
NOTE
About sending or receiving faxes
When the power plug is unplugged, the machine cannot send or receive faxes.
When a job is waiting to be printed
The job is deleted when you turn OFF the power switch.
About jobs stored in memory
Jobs can be stored in memory for approximately an hour after the power plug has been unplugged. To view jobs stored
in memory, see the following.
"Managing Faxes Stored in Memory"
Downloaded from ManualsPrinter.com Manuals
Inspections" in "Important Safety Instructions."
CAUTION