Canon i-SENSYS MF6140dn User Manual page 852

Problem The correct paper size is not specified.
See the following to check how to fix the problem.
Action
"When <Incorrect Size/Setting> Appears"
<Insert toner cartridge.>
Problem The toner cartridge is not set correctly, or the toner cartridge may be faulty.
Set the toner cartridge again. If the message still appears, the toner cartridge may be faulty. Contact your
Action local authorized Canon dealer or the Canon help line.
"Replacing the Toner Cartridge"
<Memory is full.>
A fax could not be sent or received, or a document could not be scanned due to insufficient memory
Problem 1
space.
Action 1 If there are jobs waiting to be sent or printed, wait for all these jobs to be completed.
Print, send, or delete jobs stored in memory.
Action 2
"Managing Faxes Stored in Memory"
Action 3 If sending a document with many pages, divide it into multiple sections.
If sending a fax, reduce the resolution to scan the document.
Action 4
"Changing the Scan Settings (Fax)"
If scanning, change the file format to reduce its file size.
Action 5
"Changing the Scan Settings (Saving to USB Memory Device)"
Problem 2 A scanned document could not be stored to a USB memory device due to insufficient memory space.
Delete unnecessary data to free space in the USB memory device, or connect a different USB memory
Action
device.
<Memory is full. Enter original type settings again.>
Problem You cannot copy your document as memory became full in the middle of processing it.
Set <Original Type> to <Text/Photo> before you make a copy.
Action
"Selecting the Document Type"
<Memory is full. Scanning canceled. Print?>
Problem 1 Failed to scan the documents because of the shortage of memory capacity.
Action 1 Print the pages successfully scanned or cancel the job.
Action 2 Split the job into smaller subsets before you copy.
Problem 2 Your copy job is collated so all the pages cannot be scanned.
Action 1 Print the pages successfully scanned or cancel the job.
Split the job into smaller subsets or set <Original Type> to <Text/Photo> before you make a copy.
Action 2
"Selecting the Document Type"
Downloaded from ManualsPrinter.com Manuals