Canon i-SENSYS MF6140dn User Manual page 461

[Scan] tab
[Scan without Using
ScanGear's
Window]
[Automatically Quit
ScanGear after
Scanning]
[Color Settings] tab
[Color Correction]
[Always Execute the
Auto Tone]
[Monitor Gamma]
Downloaded from ManualsPrinter.com Manuals
No frame is displayed.
If you are using an application such as OCR software that does not display the ScanGear MF
window when scanning, documents are scanned with the application settings. If you want to
scan in a specific color mode without using the application settings, specify the setting in this
option.
[Text Enhanced]
The document is scanned in a mode equivalent to [Text Enhanced] of [Color Mode],
regardless of the application settings.
If this item is selected, the [ScanGear MF] dialog box closes automatically after scanning.
Depending on the application, the ScanGear MF closes automatically after scanning, regardless
of this setting.
Selects the type of color correction.
[Recommended]
Vividly reproduces the tone of a document on the screen.
[Color Matching]
Adjusts color to that of the scanner, monitor, and color printer. If this item is selected, the
color setting buttons in the [Advanced Mode] tab are disabled. This setting is available
when [Color] is selected in [Color Mode].
Always corrects the image color automatically. This setting is available when [Color] or
[Grayscale] is selected in [Color Mode].
Adjusts the gamma. You can specify the gamma value (0.10 to 10.00) of the monitor which
displays the scanned image. This setting is not reflected in the scanning result when [Black
and White] is selected in [Color Mode].
NOTE
When [Color Matching] is selected in [Color Correction]
The value for [Monitor Gamma] is fixed at 1.80.