Setting By Manually Selecting An Access Point - Canon i-SENSYS MF6140dn User Manual

0FR4-0E0

Setting by Manually Selecting an Access Point

From the list of access points searched by the machine, select a wireless LAN router or an access point to be connected
and enter a network key for connection.
NOTE
Selecting Access Point
For selecting access points, WEP 802.11 authentication system is set to <Open System>, while WPA/WPA2 encryption
method is set to <Auto> (either AES-CCMP or TKIP).
If you want to set 802.11 authentication system to <Shared Key> or the WPA/WPA2 encryption method to <AES-CCMP>,
manually enter the value.
"Setting by Manually Entering SSID"
1
Switch the connection method to wireless LAN.
"Switching the Connection Method to Wireless LAN or Wired LAN (MF6180dw Only)"
2
Write down the following information required for the settings.
The information is needed in steps 8 through 10.
For more information on how to check, refer to the instruction manual of the wireless LAN router or access point, or
contact the manufacturer.
SSID
It may be indicated as access point name or network name.
Write down all if there is multiple SSID.
It is used when selecting an access point in Step 8.
Network Key
It may be indicated as encryption key, WEP key, WPA/WPA2 passphrase, PSK or pre-shared key.
You write down here is the network key that is currently specified for the wireless LAN router or access point.
It is used when selecting an access point in Step 9.
NOTE
Checking for SSID and Network Keys
There are cases when the defaults are written on the body of the wireless LAN router or access point.
If the settings for the wireless LAN router or access point have changed, are not described or if you are not sure of the
settings, see the following.
"Checking the SSID or Network Key of the Wireless LAN Router/Access Point"
3
Press [ ] (Menu).
Downloaded from ManualsPrinter.com Manuals