Checking Network Connection (Wired Lan) - Canon i-SENSYS MF6140dn User Manual

0FR4-0LU

Checking Network Connection (Wired LAN)

Can you
connect your
computer to
the internet?
YES
Is the
machine's
power turned
ON?
YES
Is the
machine
connected to
the router or
hub using the
correct LAN
cable?
YES
When
using the
router
Is the LAN
cable for the
machine and
computer
connected to
the router
LAN port?
YES
Is the wired
LAN set to
the
wired/wireless
LAN
machine?
Downloaded from ManualsPrinter.com Manuals
No Connect the power cable for the router, etc., the network cables and so forth.
If the power to the router and other devices is turned off, turn it on.
When you cannot connect to the internet even after checking
Restart each device. Wait a short while and then check whether the computer can
connect to the internet.
For the restart procedure, the network connection method and so forth, see the
instruction manual provided with each device, or contact the manufacturer.
No Turn ON the machine.
If the machine is already ON
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
No Use a Category 5 or higher twisted pair cable for the LAN.
No If the cable is connected to the WAN port of the router (or the internet port), connect it to
the LAN port.
If the LAN cable is loose, connect it properly.
For instructions on how to connect, refer to the instruction manual of the router
you are using, or contact the manufacturer.
No Select <Wired LAN> under <Select Wired/Wireless LAN> > in Network Settings.
"Switching the Connection Method to Wireless LAN or Wired LAN (MF6180dw
Only)"