Canon i-SENSYS MF6140dn User Manual page 811

IPv6 Address Filter
MAC Address Filter
Communication Management Settings
Settings
Fax Settings
Memory Lock Settings
Memory Lock PIN
Print Report
Memory Lock Time
Select Country/Region
Set your country or region:
Austria (AT), Belarus (BY), Belgium (BE), Czech Republic (CZ), Denmark (DK), Egypt (EG), Finland (FI), France
(FR), Germany (DE), Greece (GR), Hungary (HU), Ireland (IE), Italy (IT), Jordan (JO), Luxembourg (LU),
Netherlands (NL), Norway (NO), Poland (PL), Portugal (PT), Russia (RU), Saudi Arabia (SA), Slovenia (SI), South
Africa (ZA), Spain (ES), Sweden (SE), Switzerland (CH), Ukraine (UA), Great Britain (GB)
Downloaded from ManualsPrinter.com Manuals
It rejects or allows transmissions with specific IP addresses on the IPv6 network.
Send Filter: Off, On
Receive Filter: Off, On
"Restricting Sending/Receiving to/from Specific IP Addresses"
It rejects or allows transmissions with specific MAC addresses on the network.
Send Filter: Off, On
Receive Filter: Off, On
"Restricting Sending/Receiving to/from Specific MAC Addresses"
Set the fax settings.
TX Start Speed: 33600 bps, 14400 bps, 9600 bps, 7200 bps, 4800 bps, 2400
bps
RX Start Speed: 33600 bps, 14400 bps, 9600 bps, 7200 bps, 4800 bps, 2400
bps
R-Key Setting:
PSTN
PBX: Prefix, Hooking
"TX Start Speed"
"RX Start Speed"
"R-Key Setting"
Specifies whether to save received documents in memory without printing them out.
Off, On
"Memory Lock Settings"
Specifies a PIN number (seven digits) necessary for changing Memory Lock Settings.
"Memory Lock Settings"
Specifies whether to print Receive Results information.
Off, On
"Memory Lock Settings"
Specifies whether to receive documents only within a specified time.
Off
On:
Memory Lock Start Time
Memory Lock End Time
"Memory Lock Settings"
*A
Descriptions
*2
*2
, Other