0FR4-086
Configuring System Settings
This section describes how to configure the system settings.
See the following sections for more information.
The steps to take for configuring the system settings
Options
The steps to take for configuring the system settings
Follow the steps in the procedure below to configure the system settings.
The procedure describes the steps to change the "RX Start Speed" setting.
1
Press [
] (Menu).
2
Select <System Settings> using [
When the system manager ID and system manager PIN are specified
Use the numeric keys to enter the ID and number, and then press [
3
Select <Communication Management Settings> using [
4
Select <Fax Settings> using [
Downloaded from ManualsPrinter.com Manuals
] or [
] and press [OK].
] or [
] and press [OK].
] (Log In/Out).
] or [
] and press [OK].