Canon i-SENSYS MF6140dn User Manual page 851

<Could not connect. Check PSK settings.>
Problem The network key (PSK) for the wireless LAN router or access point is not setup in the machine correctly.
Check the wireless LAN or access point you are using, enter the correct network key (PSK) and repeat the
setup again.
"Setting by Manually Selecting an Access Point"
"Setting by Manually Entering SSID"
Action1
For information on how to check the network key (PSK), refer to the instruction manual of the
wireless LAN router or access point, or contact the manufacturer.
If the network key (PSK) is correct, check the network connection.
Action2
"Checking Network Connection (Wireless LAN)"
<Could not connect. Check security settings.>
Connection failed because settings for your wireless LAN routers and/or access points are different from
Problem
security settings of the machine.
Check the security settings of the wireless LAN router or access point, and repeat the setup again.
Action
"Setting by Manually Entering SSID"
<Could not connect. More than one access point was detected.>
Other wireless LAN routers or access points within connection range were detected.
Problem
Multiple wireless LAN routers and/or access points cannot be connected simultaneously by holding down
their respective WPS buttons.
Wait for a while and try again.
Action
"Setting the Machine Using WPS (Push Button Mode)"
<Dept. ID is not set. Register from Remote UI.>
Problem Attempted to enable <Dept. ID Management On/Off>, but no department IDs are registered.
Register the Dept. ID from the Remote UI.
Action
"Specifying the Setting for Department ID Management"
<Incorrect number of characters/invalid characters entered.>
The network key (WPA/WPA2-PSK, WEP key) for the wireless LAN router or access point is not setup in
Problem
the machine correctly.
Check the wireless LAN or access point you are using, enter the correct network key(WPA/WPA2-PSK,
WEP key) and repeat the setup again.
"Setting by Manually Selecting an Access Point"
"Setting by Manually Entering SSID"
Action 1
For information on how to check the network key (WPA/WPA2-PSK, WEP key), refer to the
instruction manual of the wireless LAN router or access point, or contact the manufacturer.
Check the network connection.
Action 2
"Checking Network Connection (Wireless LAN)"
<Incorrect Size/Setting>
Downloaded from ManualsPrinter.com Manuals