Canon i-SENSYS MF6140dn User Manual page 470

The scanned data is sent to the USB memory.
Folder and file names that can be saved
Folder name
File name
NOTE
When removing the USB memory device form the port
1. Press[
] (Reset).
2. Press [
] (Status Monitor/Cancel).
3. Select <Device Status> using [
4. Select <Remove Memory Media> using [
5. Remove the USB memory device.
6. Press [
] (Status Monitor/Cancel) after you have checked the details of the selected job to close the
screen.
Downloaded from ManualsPrinter.com Manuals
The "SCAN_00" folder is created in the top level directory (root folder) in the USB memory
device. Scanned document files are saved in this folder.
When the "SCAN_00" folder reaches limit, the "SCAN_01" folder is automatically created.
Folders up to "SCAN_99" are automatically created when the current working folder becomes
full.
File names between "SCAN0001.XXX" and "SCAN9999.XXX" are provided. ("XXX" is the
extension for the file format.)
The two-digit folder number is provided in the fifth and sixth characters from the left.
A maximum of 100 files can be saved in a folder.
] or [ ] and press [OK].
] or [ ] and press [OK].