Select the auto detect using [
<Off>
<On>
6
Select <Communication Mode> using [
7
Select the communication mode using [
<Half Duplex>
<Full Duplex>
8
Select <Ethernet Type> using [
9
Select the Ethernet type using [
Downloaded from ManualsPrinter.com Manuals
] or [
], and then press [OK].
Select the communication mode and Ethernet type manually. Proceed to Step 6.
Select the communication mode (Half duplex/Full duplex) and Ethernet type (100Base-
TX/10Base-T) automatically. Proceed to Step 11.
] or [
] or [
Send and receive data in both directions, but not at the same time.
Send and receive data in both directions simultaneously.
] or [
] and press [OK].
] or [
], and then press [OK].
], and then press [OK].
], and then press [OK].