Mac Os Settings; Configuring The Destination In Tcp/Ip Networks; Configuring The Destination For Bonjour Network; Configuring The Destination For Appletalk Networks - Canon imagePROGRAF iPF6400SE User Manual

iPF6400SE

Mac OS Settings

Mac OS Settings

Configuring the Destination in TCP/IP Networks .................................................................................................. 521

Configuring the Destination for Bonjour Network ................................................................................................. 521

Configuring the Destination for AppleTalk Networks ............................................................................................. 521

Configuring the Printer's AppleTalk Network Settings ........................................................................................... 523
Configuring the Destination in TCP/IP Networks
Configuring the Destination in TCP/IP Networks
If you use the printer in a TCP/IP network, register the printer in Print & Scan (or Print & Fax) in the Mac OS System
Preferences.
•
For details on how to register a printer using a TCP/IP network, see the OS User Manual.
Note
•
If you use the printer in a TCP/IP network, make sure the printer's IP address is configured correctly. (See "Configur-
ing the IP Address Using the Printer Control Panel.")
Important
Configuring the Destination for Bonjour Network
Configuring the Destination for Bonjour Network
If you use the printer in a network that uses the Bonjour function, register the printer in Print & Scan (or Print & Fax) in
the Mac OS System Preferences.
•
For details on how to register a printer using Bonjour, see the OS User Manual.
Note
•
Bonjour and IP Print (Auto) do not support printing to a printer on other network groups that require a router for con-
nection. Make sure the computer and printer are on the same network. For information about network settings, ask
Important
your network administrator.
•
By default, Bonjour is activated on the printer. You can activate or deactivate the Bonjour function or change the print-
er name by using RemoteUI. For instructions on changing it, see "Using RemoteUI."
Configuring the Destination for AppleTalk Networks Configuring the Destination for AppleTalk Networks
To print over an AppleTalk network, activate the AppleTalk protocol and configure the destination as follows.
Activating AppleTalk on the printer
•
By default, the AppleTalk protocol is disabled on the printer.
Important
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab (
•
If the Tab Selection screen is not displayed, press the Menu button.
Note
User's Guide
P.505
➔
).
Configuring the Destination in TCP/IP Networks
P.503
➔
521