File Menu - GE F650 User Manual

CHAPTER 3: INTERFACES, SETTINGS & ACTUAL VALUES

3.1.6 File menu

File
New (**)
Open (**)
Save (**)
Save As (**)
Close (**)
Config File (*.650)
Compare to settings file
Properties (**)
Get info from relay (*)
Send info to relay (*)
Print Setup (**)
Print Preview (**)
Print (**)
Print to file (*.xls) (**)
PLC Checksum Calculation
Settings Checksum
Calculation
Order code(*)
Exit
(*) indicates online only, (**) indicates offline only
GEK-113000-AF
Create a new settings and configuration file, with the default relay
settings and no configuration
Open a settings and configuration file for offline working.
Save *.650 settings and configuration file
Save as *.650 settings and configuration file.
Close the opened *.650 file in EnerVista 650 Setup.
Converter Tool to convert the *.650 files from one version to another
Compare online unit or opened settings file to another settings file
File properties for *.650.
Retrieve the *.650 settings and relay configuration compiled equations
from the relay.
Send and write the *.650 settings and configuration to the relay.
To configure printer settings.
Preview of settings and configuration file printing format.
Launch the *.650 file to be printed.
*.650 printed to file in excel format.
Calculate the CRC of PLC equations of the .650 file (When a .650 is
uploaded to the relay, the calculate PLC CRC and the actual value of the
PLC CRC read from the relay must match).
Calculate the CRC of settings of the .650 file (When a .650 is uploaded to
the relay, the calculate Setting CRC and the actual value of the Setting
CRC read from the relay must match).
Option available for F650 with firmware version 7.00 or above. This
allows a model to have special functionality (see model selection) with
password requirements. For detailed information go to section "9.6.3.3
ORDER CODE UPGRADE PROCESS" in chapter 9.
Quit the application closing all the open windows.
F650 DIGITAL BAY CONTROLLER
3.1 ENERVISTA 650 SETUP SOFTWARE
3-11