GE F650 User Manual page 145

CHAPTER 5: BOOTCODE AND FIRMWARE UPGRADE
12. After selecting the Network adapter, a window to choose a temporary IP address is shown. It is advisable to set the
same IP address that is going to be used later in the relay for Ethernet connection.
13. After entering the temporary IP Address, the next new window requires the bootware file retrieved from
http://www.gegridsolutions.com/index.htm
GEK-113000-AF
Figure 5-5: setting address
and previously stored someplace in the PC.
F650 DIGITAL BAY CONTROLLER
5.1 FIRMWARE UPGRADE VERSIONS BELOW 7.00.
5-7