Change Settings - GE F650 User Manual

CHAPTER 3: INTERFACES, SETTINGS & ACTUAL VALUES

3.2.6.7 Change Settings

To enter this menu press the enter/shuttle key when Change Settings is selected in main menu. A secondary level is
displayed with different sublevels. Press up-down key or rotating the shuttle key, (left for moving up and right for moving
down) select the next level to be displayed, press the enter/shuttle key again to enter in next level and press ESC key to
return to previous level if desired. This navigation is performed the same for all the menus in Change Settings. Once the
last sublevel is reached, move up and down to visualize the settings selected.
To change a particular setting, press the enter/shuttle key on the setting to be modified. After selecting the setting, the
value for that setting appears between brackets. Choose the new value moving up and down . After selecting the
appropriate value press again the enter/shuttle key to fix that value. To save the new settings, go to the end of the menu
pressing down key or rotating the shuttle key right, and select Press Enter to save settings. When pressing the shuttle key
inside this menu the new settings is saved.
GEK-113000-AF
Select the menu Change settings and press the enter/shuttle key to enter in the
next sublevel.
If there is more than one sublevel, select the next sublevel by pressing the up-down
keys or rotating and pressing the enter/shuttle key until the last level is reached.
Press the enter/shuttle key in the function to be modified
-> Group of settings
-> Setting to be modified
-> Value
-> Range and step
Pressing the enter/shuttle key, value appears between brackets and can be
modified pressing the up-down keys or rotating the shuttle key. Pressing again the
enter/shuttle key, the new value is accepted.
Once all settings inside the group have been modified, go to the last screen pressing
the down key or rotating the shuttle key and press Enter. At this moment of time,
the new settings is active in the relay.
Figure 3-26: Change settings in HMI
F650 DIGITAL BAY CONTROLLER
3.2 HUMAN-MACHINE INTERFACE (HMI)
3-51