GE F650 User Manual page 71

CHAPTER 3: INTERFACES, SETTINGS & ACTUAL VALUES
Table 3-2: Types of files generated by EnerVista 650 Setup software, online
Settings & Configuration File *.650
Description Settings and Configuration Section
Created by EnerVista 650 Setup
Contents Relay configuration file containing all elements,
settings, input/output and LEDs configuration, graphic
display configuration, etc.
Equations corresponding to the logic created and
compiled in the PLC Editor
How to Connect with the relay (Communications > Computer) Connect with the relay (Communications > Computer)
transfer to
Send settings and configuration from file
relay
Modify settings and configuration directly in the relay:
How to save EnerVista 650 Setup:
File > Get info from relay. User definable texts retrieved
are operations, events, and LEDs.
How to store Communication > Upload info files to relay through
in the relay Ethernet
How to Communication > Download info files from relay
retrieve from through Ethernet
the relay
REMINDER:
Logic programming support files (*.pep, *.aut, *.lib) CANNOT be retrieved directly from the relay.
It is necessary to do one of the following to store support files:
* Store in the PC
* Upload to the relay (Communication > Upload info files to relay), after which they can be retrieved from the relay
GEK-113000-AF
Logic Configuration Files (*.pep, *.aut, *.lib)
*.pep
Header for Logic
project
Logic configuration
graphic editor (PLC
Editor)
PLC project file
containing the
necessary
information
relative to the relay
model, logic
libraries included in
the project (*.lib),
graphic file name
(*.aut), etc.
Launch 650 Logic equations editor (Setpoint > Logic
Configuration)
Open the created PLC project (File > Open Project)
Compile the project (Run > Compile)
Now the logic (virtual outputs) can be sent directly to relay
(Run > Send Equations to Relay). Texts of virtual outputs are
not stored in the relay, only in the logic configuration files to be
edited.
PLC Editor:
File > Save Project
The relay does not
provide this
information unless
the *.pep file is
stored in the relay
To store the logic configuration files in the relay use the
Communication > Upload info files to relay option
Communication > Upload info files to relay through Ethernet
Communication > Download info files from relay through
Ethernet
F650 DIGITAL BAY CONTROLLER
3.1 ENERVISTA 650 SETUP SOFTWARE
*.aut *.lib
Graphical edition User programmable
container. Logic logic objects
equations (Virtual
Outputs) in FDB
format.
Logic configuration Logic configuration
graphic editor (PLC graphic editor (PLC
Editor) Editor)
PLC Project file Library file to be
containing all the included as an object
drawings used by in a PLC project.
the logic, required Logic packages that
by 650 relay based can be stored into
on IEC 61131-3 libraries and be
standard. distributed in
Functional block different PLC
diagram (FDB). projects.
File > Save Library
The relay does not The relay does not
provide this provide this
information unless information unless
the *.pep file is the *.pep file is
stored in the relay. stored in the relay.
3-9