Order Code Upgrade Process - GE F650 User Manual

5.2 FIRMWARE UPGRADE VERSION 7.00 OR ABOVE
• Communication > Calibration > Set Calibration Files: to restore in the relay the calibration settings if necessary.
• File > Config File (*.650) Converter: to convert the setting and configuration file *.650 for the relay (if it was in a
previous version format).
• File > Send Info to Relay: to send the new settings and configuration file to the unit.

5.2.2.3 Order code upgrade process

In the case of a relay model with specialized functionality (or a new order code requirement) with password requirement
(see model selection), the program requests a password to continue.
1. To reach the window where the password is requested, the user must be communicating with the relay (ONLINE
MODE). On the File menu the following submenu is available (for firmware versions above 7.00):
2. Click Order Code on the menu and the following window is displayed:
5-26
Figure 5-1: Order code submenu
F650 DIGITAL BAY CONTROLLER
CHAPTER 5: BOOTCODE AND FIRMWARE UPGRADE
GEK-113000-AF