View Settings Menu - GE F650 User Manual

CHAPTER 3: INTERFACES, SETTINGS & ACTUAL VALUES
3PHASE
NAF

3.2.6.6 View settings menu

To enter this menu press the enter/shuttle key when the option View Settings is selected in main menu (o). A secondary
level is displayed with different sublevels. Pressing up-down keys or rotating the shuttle key, (left for moving up and right
for moving down) select the next level to be displayed (o), press the enter/shuttle key again to enter in next level and press
esc key to return to previous level if desired. This navigation is performed the same for all the menus in "View Settings".
Once the last sublevel is reached, move up and down to see the available settings.
MAIN SETTINGS
MENU
Product Setup >
System Setup >
Protection Element >
(*) See note
GEK-113000-AF
AB phase A to phase B
BC phase B to phase C
CA phase C to phase A
Three-phase faults (shown on the display as 3PH)
Fault type not calculated
FIRST LEVEL
Communication >
Fault Report
Oscillography
Demand
Time Settings
General Settings
Breaker >
Misc. settings
Phase Current >
Neutral Current >
F650 DIGITAL BAY CONTROLLER
SECOND LEVEL
Serial Ports
Ethernet >
ModBus Protocol
DNP3 Slave (Available for standard and
IEC61850 models)>
IEC 870-5-104(Available for standard and
IEC61850 models)>
SNTP
PROCOME (Available for procome models
only).
PTP 1588
Routing
Breaker Settings
Breaker Maintenance
Phase TOC High >
Phase TOC Low >
Phase IOC High >
Phase IOC Low >
Phase Directional >
Thermal Model >
3.2 HUMAN-MACHINE INTERFACE (HMI)
THIRD LEVEL
Ethernet A
Ethernet B
Ethernet E
Redundancy
DNP3 Slave 1..3
Phase TOC High 1..3
Phase TOC Low 1..3
Phase IOC High 1..3
Phase IOC Low 1..3
Phase Directional 1..3
Thermal Model 1..3
3-47