Programming Menu; Quick Setup - GE ASTAT XL User Manual

8

Programming Menu

The Programming Menu lets you view and change programmable parameters that control how the
ASTAT XL operates.
To open the Programming Menu, press the MENU/ENTER button while viewing the status or graph
screens.
To navigate through the Programming Menu:
• to scroll through parameter groups, press the
• to open a submenu, press the ENTER button.
• to view the parameters in a group, press the ENTER button.
• to return to the previous level, press the EXIT button.
• to close the Programming Menu, press EXIT repeatedly or press the STATUS or GRAPHS button.
To change a parameter value:
• scroll to the appropriate parameter in the Programming Menu and press ENTER to enter edit
mode.
• to alter the parameter setting, use the
increase or decrease the value by one unit. If the button is held for longer than five seconds, the
value will increase or decrease at a faster rate.
• to save changes, press ENTER. The setting shown on the display will be saved and the keypad
will return to the parameter list.
• to cancel changes, press EXIT. The keypad will ask for confirmation, then return to the parameter
list without saving changes.
You can access the Programming Menu at any time, including while the soft starter is running. Any
changes to the start profile take effect immediately.
The Programming Menu contains four sub-menus:
Quick Setup Menu
Standard Menu
Extended Menu
Setup Tools
8.1

Quick Setup

The Quick Setup Menu makes it easy to configure the ASTAT XL for common applications. The ASTAT XL
selects the parameters relevant to the application and suggests a typical setting, and you can adjust
each parameter to suit your exact requirements.
Always set parameter 1A Motor Full Load Current to match the motor's nameplate full load current.
The suggested value is the starter's minimum full load current.
On the display, the highlighted values are suggested values and the values enclosed in a box are the
loaded values.
36
ASTAT XL User Manual
and
Provides access to quick setup options for common applications.
The Standard Menu provides access to commonly used parameters, allowing
you to configure the ASTAT XL to suit your application.
The Extended Menu provides access to all the ASTAT XL's programmable
parameters, allowing experienced users to take advantage of advanced
features.
Setup Tools includes maintenance options to configure the ASTAT XL's date
and time or load a standard parameter set.
DET-812
Fout! Stijl niet gedefinieerd.
or button.
buttons. Pressing or once will