Clearing jams
Jams in the Automatic Document Feeder (ADF)
When a document jams or misfeeds in the ADF, CHECK DOCUMENT is displayed on the LCD.
Follow the procedure below to clear the document jam.
n
You do not need to unplug the fax when clearing document jams.
Press [Stop].
1
While holding the operation panel open,
3
remove the document.
• Pull it gently in either direction.
• If a multipage document is loaded, remove the
entire document from the ADF.
n
If the paper does not pull out easily, do not
force it. Contact your local authorised Canon
dealer or the Canon help line.
10-2
Open the operation panel partially by
2
gently pulling it towards you.
• It only opens slightly.
• Do not try to pull the document out without
opening the operation panel since you may
tear or smudge the document.
When you are finished, close the operation
4
panel by pressing it down from the centre.
Be sure to close the operation panel until it
locks into place, or the fax will not function
properly.