Table of Contents
Advertisement
glass.
NOTE:
• When the document is loaded in the document feeder, the base point in the Y direction is the center
of the edge. If you specify 100 mm, the scan length will be from 50 mm above to 50 mm below the
center of the document.
Image Shift
This feature allows you to shift the position of document images so that the images are
placed on the left, right, top, bottom, or center of paper. You can also adjust the amounts
of the left, right, top, and bottom margins. If you make 2-sided copies, you can adjust the
image positions for Side 1 and Side 2 individually.
NOTE:
• The image shift amount is set in accordance with the paper, and does not affect the setting made in
Reduce/Enlarge.
Off
Does not shift the position of document images.
Auto Center
Shifts document images so that they are placed in the center of paper.
Snap to Edge
Shifts document images so that they are placed at an edge or corner of paper. You can
select from 8 shift directions.
Mirror Side 1
Select this option when you want the positioning of Side 2 to match the positioning of
Side 1.
Independent Sides
Select this option to make the positioning of Side 2 differently from Side 1.
Manual
Allows you to specify the amounts of the top and bottom, and left and right margins in
the range from 0 to 50 mm in 1 mm increments.
Original Orientation
This feature allows you to specify the orientation of a document so that the machine can
identify the top of the document.
NOTE:
• If this setting differs from the actual document orientation, the machine may not detect the top of
the document correctly.
Portrait
Select this option when your document is a portrait page.
For LEF loading, the machine regards the top edge as the head of pages.
For SEF loading, the machine regards the left edge as the head of pages.
88
|
Copy
Advertisement
Table of Contents
