Table of Contents
Advertisement
5 Eject the Software and Documentation disc.
Configuring the Wireless Settings
The wireless adapter allows you to use the printer with wireless network connection.
The specifications of the wireless adapter are described below.
Item
Connectivity Technology
Compliant Standards
Bandwidth
Data Transfer Rate
Security
Wi-Fi Protected Setup (WPS)
Wireless Mode
*1
EAP method supports PEAPv0/MS-CHAPv2, EAP-TLS, EAP-TTLS/PAP, EAP-TTLS/CHAP and
EAP-TTLS/MSCHAPV2.
*2
WPS 2.0 compliant.
NOTE:
• The wireless adapter is configured as a secondary network interface by default.
If the wireless connection is the only network to be used, the wireless adapter must be set as the
primary interface.
• When the wireless adapter is configured as a primary network interface, you cannot use IEEE 802.1x
authentication on the Ethernet port.
36
|
Connecting and Setting Up Your Printer
Specification
Wireless
IEEE 802.11a, 802.11b, 802.11g, and 802.11n
IEEE 802.11n, 802.11g and 802.11b: 2.4 GHz
IEEE 802.11n and 802.11a: 5 GHz
IEEE 802.11n: 72 Mbps
IEEE 802.11g and 802.11a: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps
IEEE 802.11b: 11, 5.5, 2, and 1 Mbps
64 (40-bit key)/128 (104-bit key) WEP,
WPA Personal (TKIP, AES), WPA2 Personal (AES),
WPA Enterprise (TKIP, AES)
*2
Push-Button Configuration (PBC),
Personal Identification Number (PIN)
Infrastructure, Ad-hoc, Wi-Fi Direct
*1
, WPA2 Enterprise (AES)
*1
Advertisement
Table of Contents
