Table of Contents
Advertisement
Status Code
027-791
• Check if the destination is a WebDAV server.
• Share the destination file and folder to permit reading and writing.
• Check the path to the destination.
027-792
• Check the path to the destination.
• Check if the destination WebDAV server is accessible from a computer.
027-793
• Try the same operation.
Contact customer support if this failure is repeated.
027-794
• Check the WebDAV server is working correctly.
• Check if the destination WebDAV server is accessible from a computer.
027-795
• Check if the destination is a WebDAV server.
• Share the destination file and folder to permit reading and writing.
027-796
The received e-mail was discarded because no documents were attached to it. (The
machine is set to print attached documents only.)
To print the mail message or header information as well, change the settings on Dell
Printer Configuration Web Tool.
027-797
Specify a correct output destination, and send the e-mail again.
027-798
The specified document does not exist.
Specify an existing document and try again.
027-799
Make sure that there is available space in the server.
028-910
Replace the fusing unit.
028-986
The paper size specified for the job does not match the size of paper loaded in the tray.
Load the correct size of paper in the tray, and then try the same operation.
028-987
The paper specified for printing cannot be detected.
Change the settings.
029-700
• Check the WebDAV server is working correctly.
• Check if the destination WebDAV server is accessible from a computer.
• Check if the destination WebDAV server is accessible from a computer.
029-701
• Check the server settings.
Contact customer support if this failure is repeated.
029-702
Try the same operation. Contact customer support if this failure is repeated.
029-703
An error occurred in the communication with the Client Scan client, or the client canceled
the job.
Check the network communication with the Client Scan client by checking the following.
• Check that the amount of space of the Client Scan client is enough.
• Check the connection of the network cable.
029-704
Wi-Fi error. The format of the proxy auto-config (PAC) file is invalid.
Ask your network administrator to see if the format is available for JavaScript, and if the file
size is 64 KB or less.
Contact customer support if this failure is repeated.
029-705
Wi-Fi error. A timeout error occurred when the printer obtains a proxy auto-config (PAC)
file. Check and correct the following:
• LAN cable connection
• Default gateway configuration
• Subnet mask configuration
• DNS server address configuration
If the failure persists, the network or the HTTP server may have a problem. Consult your
network administrator.
Contact customer support if this failure is repeated.
Cause and Remedy
Understanding Printer Messages
327
|
Advertisement
Table of Contents
